Hi Frdz...i have very great discussion with you now i have just created a home network with my pc as server and one laptop connected to my pc with a lan network.There are few steps to be followed here.
Step 1: Get a lan wire (RJ45 male pin - cross over cable) or prepare it using crimping tool.
Step 2: Should have two female RJ45 pins on the PC motherboard if not do this.
Get an intex internal NIC card with for Rs.160 and install it to ur PCI slot given in your motherboard and install the given software with in the box.
Step 3: Connect any broadband internet to your motherboard RJ45 female jack from your modem(Straight through).
Step 4: Now connect another wire cross over cable from NIC card on the back of your PC to the laptop or another PC.
Step 5: Switch on both computers and now go to 1st PC and open RUN command and type "ncpa.cpl" when opened right click on the local area network click for sharing and restart your both pc's now check one connection for both system.This forms a gateway between two systems
ENJOY
